Titanium Alloy Sheet

TA6VE high wear-resistant titanium alloy TA6VE titanium alloy specific gravity TA6VE high wear-resistant titanium alloy TA6VE titanium alloy specific gravity pure titanium, titanium alloy, titanium alloy plate, titanium alloy sheet, titanium alloy thick plate, titanium alloy round bar, titanium alloy bar, titanium Alloy bars, TC4 titanium alloy, TC4 ELI titanium alloy, Ti-6Al-4V titanium alloy, Ti-6-4 titanium alloy, 6-4 titanium alloy, Ti-6Al-4V ELI titanium alloy, Ti-6-4 ELI Titanium alloy, 6-4ELI titanium alloy, Grade5 titanium alloy, Grade23 titanium alloy, GR.5 titanium alloy, GR.23 titanium alloy, UNS R56400 titanium alloy, UNS R56401 titanium alloy, AB-1 titanium alloy, AB-2 titanium alloy , DIN 3.7164 titanium alloy, DIN 3.7165 titanium alloy, TiAl6V4 titanium alloy, TAP6400 titanium alloy, Class 60 titanium alloy, BT6 titanium alloy, BT6C titanium alloy, titanium alloy fracture toughness, corrosion resistant titanium alloy, high temperature resistant titanium alloy, low temperature resistant titanium Alloy, ultra-low gap titanium alloy, aviation titanium alloy, salt water corrosion resistant titanium alloy, titanium alloy specific strength, titanium alloy density, medical titanium alloy, titanium alloy fatigue strength, forged titanium alloy

GR1, GR2, GR3 Titanium alloy sheet has excellent stamping performance. It is easy to saw and cut with a grinding wheel, and has good mechanical processing performance. Excellent corrosion resistance It is used for parts below 350°C with low stress and parts stamped into various complex shapes. Widely used, thermal power plant condensers; chemical heat exchangers, pump bodies, distillation towers; marine seawater corroded piping systems, valves, pumps; seawater desalination systems, platinized anodes; aircraft skins, engine parts, etc.

Ti-5A1 has good welding performance and high creep strength, but the process plasticity is low, and it can be deformed in a hot state. When the alloy is subjected to axial load, it is not sensitive to notches, and the cutting performance is still good. Working below 400 ℃ Parts and weldments

GR5 has good thermoplasticity, good corrosion resistance and good thermal stability. Machining performance is still good, need to use carbide tools, large cutting volume, slow speed, and sufficient cooling.

GR6 has poor stamping performance and good thermoplasticity. Various forms of welding can be carried out, with good performance, and the strength and plasticity of the welded joint can be equal to that of the base metal. The machining performance is the same as that of industrial pure titanium. Good corrosion resistance, good high-temperature thermal stability. For long-term working structural parts below 500℃, various die forgings can be made

Ti-0.05Pd has good thermoplasticity. It can be welded in various forms with good weldability. Excellent machining performance. Good oxidation resistance, long-term working parts below 500℃.

Ti-4Al-1.5Mn has a permanent strength of more than 400MPa for 100h at 350℃, and it has good plasticity during hot working. When heated to 350-400°C, there is no tendency to become brittle. Therefore, it can be used to weld parts that work at high temperatures to make parts that work below 500°C, welded parts, die forgings, and bending parts, etc.

Ti-6.5Al-3.5Mo-2.5Sn-0.3Si has good thermoplasticity. Machinability is the same as TC4 alloy. High corrosion resistance. The thermal stability is still good for long-term working parts below 400℃. Can manufacture compressor discs and blades

TA-662 has good thermoplasticity, good corrosion resistance, good thermal stability, heat treatment, and good hardenability. Machining performance is the same as GR5 alloy.

ATI425 titanium alloy is a new titanium alloy that can replace the most common high-strength titanium alloy. The composition of the alloy is Ti-4Al-2.5V-1.5Fe-0.25O, and its strength is equivalent to Ti-6Al-4V, but it is different from it in that it can work both hot and cold. It can be made into a series of semi-finished products such as thin plates, coils, strips, hot-rolled strips, thick plates, seamless pipes, castings and engineered products.

Tests show that ATI425 titanium is easier to process than Ti-6Al-4V. Titanium double annealed thick plates have good fracture toughness, and the bending radius of cold rolled and annealed titanium sheets is 2.5 times the thickness. It can also be heat treated, aging treated and aged to high strength.

Hot Tags: titanium alloy sheet, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, made in China, Pickling Face Titanium Plate, Titanium Alloy Sheet, Titanium Alloy Plate, Thin Titanium Sheet, Titanium Plate