Thin Titanium Sheet

China's titanium plates need to develop in the high-end direction, thus occupying the demand of high-end industries for titanium plates. Titanium plates have entered the electronics, communications and other industries, and entering these industries requires titanium plates to meet three aspects, and ultimately achieve the overall equipment operation effect.

Aspect 1: Extremely thin

The thickness of the precision titanium plate is very small, mainly below 0.3 mm. If this index is exceeded, the titanium plate belongs to the ordinary type and cannot become the precision type. Therefore, the titanium plate must be improved towards the extremely thin aspect to ensure the actual production demand.

Aspect 2: High-intensity

Although the thickness of the titanium plate is relatively small, its strength must be high. If the strength is very bad, the overall titanium plate is prone to breakage during processing, making the overall effect unable to be highlighted.

Aspect 3: High precision

High precision is one of the current development directions of precision titanium plates. High precision can reduce various incompatibility caused by various nuances, and ultimately cause equipment operation failures. As long as the above three conditions are met, the titanium plate has become a high-end product, which can guarantee the operation effect of the product.

Tensile Strength

Shenghui's titanium alloy sheet has been sold to China, Europe, the United States and other countries, and the products have been successfully delivered to the aviation and aerospace industries, and have been well received by customers.

Titanium alloy has good room temperature and high temperature mechanical properties, excellent fatigue resistance and crack growth resistance. In recent years, with the rapid development of the global aerospace industry and the application of the new technology of superplastic forming and diffusion bonding of titanium alloy sheets, the international and domestic demand for titanium alloy sheets has increased. In the domestic production of titanium alloy sheet, most of them still use single-piece rolling. Due to the poor plasticity of titanium alloy at low temperature and large cold deformation and work hardening, it is extremely difficult to produce thin-plate by single-piece method. The degree of cold rolling deformation rate does not exceed 25%, and it requires multiple cold rolling, intermediate annealing, alkali pickling, and process defects such as cracks, cracks, slag drop, and pitting during rolling. According to relevant statistics, in the production of TC4 sheet, the invisible loss caused by alkali pickling and polishing is as high as about 30%, and the overall yield is only about 35%, and the production cycle is long and the performance is unstable.

Russia's AVSMA-VSMPO, American Reactive Metal Company (RMI) and Japan's NKK Company all use the cladding and rolling process to produce titanium alloy sheets.

Hot Tags: thin titanium sheet, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, made in China, Pickling Face Titanium Plate, Titanium Alloy Plate, Titanium Plate, Titanium Alloy Sheet, Thin Titanium Sheet