High Purity Titanium Rod

Titanium rod This is the titanium sponge purified to 99.9%, rolled to get the titanium rod, cut to get the round rod. Titanium rod is a titanium alloy containing a certain amount of titanium element. Titanium alloy specific gravity is small, good thermal strength, good weldability and excellent corrosion resistance, the disadvantage is low room temperature strength, usually used as heat resistant materials and corrosion resistant materials.

Pure titanium is different, industrial pure titanium contains more oxygen, nitrogen, carbon and a variety of other impurities elements (such as iron, silicon, etc.), it is essentially a low alloy content of titanium alloy. Compared with chemical pure titanium, due to contain more impurity elements, its strength is greatly improved, its mechanical and chemical properties are similar to stainless steel (but compared with titanium alloy strength is still lower).

The characteristics of industrial pure titanium are: strength is not high, but good plasticity, easy to process forming, stamping, welding, cutting performance is good; It has good corrosion resistance in atmosphere, seawater, wet chlorine and oxidizing, neutral and weakly reducing media, and its oxidation resistance is better than that of most austenitic stainless steels. But heat resistance is poor, the use temperature should not be too high.

Industrial pure titanium is divided into TA1, TA2 and TA3 according to its impurity content. The interstitial impurity elements of these three industrial pure titanium are gradually increased, so their mechanical strength and hardness are gradually increased, but the plasticity and toughness are decreased accordingly.

TA3 can be selected for high wear resistance and strength requirements. TA1 can be used for better forming performance.

Industrial pure titanium is mainly used for the working temperature below 350℃, the force is not big, but requires good plastic stamping parts and corrosion resistant structural parts, such as: aircraft skeleton, skin, engine accessories; Marine corrosion-resistant pipes, valves, pumps, hydrofoil and parts of seawater desalination system; Chemical heat exchanger, pump body, distillation tower, cooler, stirrer, tee, impeller, fasteners.

Implementation standard of titanium rod:

GB/T2965 and ASTMB348 are commonly used standards in chemical industry

Advantages and disadvantages of titanium rod:

1. High strength, low density, good mechanical properties, good resistance and corrosion resistance function.

2. High viscosity, difficult cutting, poor wear resistance, complex production process

Titanium rod production

Titanium rods are made from titanium sponge through a series of processes. The first step is the production of titanium sponge, which involves the chlorination of rutile ore, which is obtained from beach sand. Coke and chlorine are mixed with rutile to form titanium tetrachloride, which then reacts with magnesium in a closed system. A vacuum distillation process is used to remove magnesium and magnesium for recirculation. The sponges are melted with alloying elements such as aluminum, vanadium, tin, zirconium and molybdenum in an electron beam furnace or a vacuum arc quench furnace. It will produce re-die-cast electrodes that can be die-cast or melted into slabs by VAR - titanium rods are obtained by further processing of cast or forged slabs.

Application of titanium rod

1, industry: titanium industrial applications are very large. Titanium's durability, light weight, corrosion and heat resistance, and cost effectiveness make it a top priority in the industry. A wide variety of titanium parts are used in industry. Titanium is used in oil production, power plants and processing plants.

2. Aerospace industry: Titanium rods and sheets are commonly used in the aerospace industry.

3, Portable computers: Manufacturers use titanium rods because it has an industrial, modern and shiny appearance. Laptop manufacturers use titanium in different processes in the manufacture of laptop computers. The laptop industry is the biggest consumer of thin titanium rods.

4. Armor: Titanium rods are light and strong, which is why armor manufacturers use titanium rods in the manufacturing process to make armor light and easy to wear.

5. Art and architecture

The rugged appearance of titanium bars has made them a popular choice for sculpture and buildings. Titanium rods and sheets are used exclusively in skyscrapers. Titanium strips are used to support buildings.

Can provide detection report to ensure titanium content, the goods according to the national standard production, material composition in line with national standards. The inspection report of product ingredients shall be provided with the goods.

Why CHOOSE US??

"Titanium City Resource base" : manufacturers direct supply, primary source quality is guaranteed.

Years of precipitation, rich experience: years of focus on titanium and titanium alloy field of research and development, design, production and sales.

One-stop procurement service: smelting and CNC machines and other equipment, can be customized processing.

Perfect after-sales service: free to provide professional titanium material use technical consultation, quickly help you solve the problem.

Hot Tags: high purity titanium rod, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, made in China, Titanium Rod