Titanium Forged Torus

Titanium forged torus-Metal heating, hammering or extrusion is performed on titanium alloy forgings to produce a plastic deformation process to obtain the desired part shape. This process can be done by using a hammer or a press. In the process, the casting establishes a fine-grained structure and improves the physical properties of the metal. In the actual use of the parts, the correct design can make the particles flow in the direction of the main pressure.

The inside of the forging has undergone metallographic inspection, and the organization is consistent, without pores, excess voids or other defects. The comprehensive physical properties and strength indicators of the parts produced by this method have been greatly improved. The advantages of forging make the forging blank have a stretchable length and a shrinkable section. Therefore, the shape of the forging is not limited to a circular shape. The types of forging are: free forging/hand forging, hot die forging/precision forging, rough rolling, roll forging and die forging.

Shenghui adheres to the principle of customer first and quality first, and has been committed to providing customers with customized titanium products for 12 years.

Shenghui's titanium products use high-quality sponge titanium, which has the characteristics of high strength, light weight, corrosion resistance, good biocompatibility, and high temperature resistance. It has strong resistance to chlorine-containing media, almost all salt solutions, sea water, a series of acids, organic and inorganic chemicals and gases.

The technological process of our factory for producing titanium and titanium alloy rods includes hot forging, hot rolling, polishing, machining, extrusion, welding, casting and spinning.

We can provide:

Titanium forged square

Titanium forging disc/rod

Titanium forged round

Titanium forgings/blanks

Titanium alloy forged ring/circle

Features of titanium forgings:

1) Large weight range: Titanium forgings can be as small as a few grams to hundreds of tons

2) The quality of titanium forgings is higher than that of castings:

Titanium forgings have better mechanical properties than castings and can withstand greater impact and other heavy loads. Forgings are mostly used in all important and stressed parts. Forgings are of better quality than rolled products.

3) Light weight:

Under the premise of ensuring design strength, forgings are lighter than castings, reducing the weight of the machine itself, which is of great significance to transportation, aircraft, vehicles and aerospace equipment.

4) Save raw materials:

For example, for a crankshaft with a dead weight of 17kg for automobiles, when cutting and forging with rolled materials, the chips account for 189% of the weight of the crankshaft, while when using die forging, the chips only account for 30% of the weight of the crankshaft. The weight of the crankshaft. The weight of the crankshaft. The weight of the crankshaft. %, which also reduces processing time by 1/6. Precision forging not only saves more raw materials, but also saves more machining time.

5) High production efficiency: Using two hot forging presses to forge radial thrust bearings can replace 30 automatic cutting machines.

6) Free forging has great flexibility. Therefore, some repair shops widely use forging methods to produce various parts.

Titanium forgings are mainly used to manufacture aircraft engine compressor parts, followed by structural parts for rockets, missiles and high-speed aircraft. In the mid-1960s, titanium and its alloys were used in general industry to manufacture electrodes in the electrolysis industry, condensers in power stations, heaters for petroleum refining and desalination, and environmental pollution control devices. Titanium and titanium alloys have become a kind of corrosion-resistant structural materials. In the application of various titanium alloy products, forgings require high strength, high toughness and high reliability. Therefore, forgings not only require high dimensional accuracy, but also require materials with excellent characteristics and high stability. For this reason, it is necessary to give full play to the characteristics of titanium alloys in the manufacturing process of titanium forgings to obtain high-quality forgings. Titanium alloys are difficult to forge and are prone to cracks. Therefore, the most important thing in the production of titanium alloy forgings is to properly control the forging temperature and plastic deformation. When choosing forgings, you must pay attention to choosing those strong forging plants, so that you can guarantee it. The factory has rich forging experience, well-equipped and skilled workers. In the future, you will be very happy to choose Shenghui.

Hot Tags: titanium forged torus, China, suppliers, manufacturers, factory, customized, wholesale, low price, for sale, in stock, made in China, Titanium Forged Round, Titanium Forged Square, Titanium Forged Torus, Titanium Forged Parts